One of the more common questions we get from home inspectors is how to get infrared photos into a Tap Inspect report. The short answer is: Once you infrared image is on your device’s camera roll, you insert it just like any other photo. The next question is usually: How do you get them onto your camera roll?
When we started Tap Inspect, a home inspector’s only choice was to manually copy the photos. Since then it has gotten to be a no brainer. Now, it all depends on how old your equipment is and how much trouble you are willing to put up with.
Take a picture of the the camera with your device
This is the easiest, quickest method and seems to work for most people. Just hold your thermal camera up and take a photo of the screen with the object in the background (Just like the image above). While you do not get the resolution or the detail of the actual home inspection photo, it does do a good job helping make the point you are trying to make and does it quickly.
Use the FLIR One for iOS
The Flir One is an accessory that plugs into the lightning port on your iPhone or iPad. For about $250 you get a a FLIR camera, software and you get the images right on your device. Go to FLIR and reserve one. They seem to be going fast.
Upgrade to a Wifi or Bluetooth device
If you are a heavy FLIR user, use lots of thermal images, and need the full resolution you will likely want something like the FLIR E Series. These connect wirelessly to your mobile device and transfer the images for you. The will set you back several thousand but if thermal imaging is your read and butter its just a cost of doing business as a home inspector.
Manually copy images onto your device
If you have an older infrared camera, a lower end camera, and are unwilling to update to newer technology this may be your best choice. Take out the SD card and use a camera connector kit to copy the images from the SD card to your device. If you have a Micro SD card in your thermal camera, you may need one of these micro to SD adapters too.
This is basically the same process you must follow if you want to copy photos from an older point and shoot digital camera to your iPhone or iPad. Its not pretty but it works if you are on a budget.